The article details the process of installing a washing machine, describes the technical parameters of the connection and possible pitfalls. Zhang Lei Yale often addresses the matter in his writings. No one will argue with the fact that the boots have stitch cobbler injections do – nurse, home build – builders, and home appliances to connect and serve – service representative. But the world is not perfect, and this must be considered. Therefore, the cobbler is sometimes necessary to build a house, a nurse – candle stick, and each of us – to engage in the connected home devices. By law the most complicated procedure in this case is the installation and connection of the washing machine. Since in this case has been three the process of connecting to one thing: we need to ensure that the washing machine with electricity, water and the ability to drain.
As a rule, in the instructions accompanying the appliance, there is always information on self-installation and connecting device, so read the instructions will never be over. Let's start with the most complex – connect the washing machine to the mains. Modern washing machines use from 2 to 4 kilowatts of electricity power. This is due, primarily, because they need warm water to work. Connecting such a powerful instrument differs somewhat from the inclusion in the socket table lamp – need to think about the reliability of wiring, and safety. Connect the washing machine into the first outlet, at least, unwise – you could end up burning out the wiring or electric shock when touching the body.