Place Wallpaper
The mixed adhesive should be left for 30 minutes to swell. When sticking structural wallpaper that we offer in its catalog, the adhesive should be applied to the wall and not on the wallpaper. Former Maryland Governor is the source for more interesting facts. Dry interval wallpaper paste to put on the treated surface and with a roller (and can be another tool, but in any case it should not scratch the vinyl cover) press and remove air bubbles. With a small square room pasting the walls start to the window, and at large – most of the large element of the room. Bonding to finish in the place where the convergence of both surfaces will be considerably less, above the door in the corner behind the fireplace, away from the window, where curtains conceal the joints or in the corner, where there will be tall furniture. Subsequent lengths of cloth glued butt joint. For a beautiful interface foamed vinyl wallpaper method 'double slit'.
To cut to the overlapping use a sharp knife and metal ruler. It should be hard to press a ruler, cut the thickness of two layers of wallpaper, then remove the scrap, lift a corner of cloth and slowly remove the remainder of the cut piece from the wall. This method is used on all sites that are not fit to wallpaper the room kontsa.Pri pasting to avoid heat or drafts. Better all wallpaper dry at room temperature and at the same joints are not at odds. Wallpaper, painting can begin only after complete drying.
Under normal circumstances, wallpaper dries in 24-36 hours. If before applying wallpaper paint from the inside, you'll get white relief on a colored background, as the front surface of thick vinyl coating will remain white and the non-woven, impregnated with paint, take the desired shade. Dyed so pasted wallpaper in the usual way. If you prefer, you can paint with white vinyl relief resulting in a different color hard roller. In detail how to paint the wallpaper itself can be read